You are here: Home >Products > Product Category >Vacuum Furnace >High Temperature Vacuum Furnace >high temperature vacuum furnace
  • high temperature vacuum furnace

high temperature vacuum furnace

The oxidation and decarburization of the surface of the workpiece during heating are completely eliminated, and a clean surface without a deteriorated layer can be obtained. This is highly relevant for the improvement of the cutting performance of the tool that only grinds one side during sharpening (such as the twisted surface of the grooved surface directly exposed to the cutting edge after the twist drill is ground).

Functions:

      1.Standard working temperature up to 2200°C (option up to 2400°C)

      2.Standard vacuum: 5×10-3Pa

      3.Furnace gas: Ar / N2 (and others on request)

      4.Debinding / dewaxing as option 

      5.Thermal post combustion (TPC) as option 

      6.Fast cooling system, insulation opening, gas circulation as option

      7.Special sizes and functions on request

      8.Special furnaces for C and SiC

      9.Heating and heat preservation can choose graphite heating + graphite felt heat preservation.

 

Model

Effective sizemm
WxHxD

Max temp

Ultimate vacuumPa

VVS-30/50

300x500

1450/2400

  1. 10

VVS-60/80

600x800

1450/2400

  1. 10

VVS-80/120

800x1200

1450/2400

  1. 10

VVS-100/150

1000x1500

1450/2400

  1. 10

 

The oxidation and decarburization of the surface of the workpiece during heating are completely eliminated, and a clean surface without a deteriorated layer can be obtained. This is highly relevant for the improvement of the cutting performance of the tool that only grinds one side during sharpening (such as the twisted surface of the grooved surface directly exposed to the cutting edge after the twist drill is ground).
No pollution to the environment, no need to carry out three waste treatment.
The degree of mechatronics is high. On the basis of the improvement of temperature measurement and control precision, workpiece movement, air pressure adjustment, power adjustment, etc. can be pre-programmed, and quenching and tempering are carried out according to the steps.
The energy consumption is significantly lower than the salt bath furnace. The modern and advanced vacuum furnace heating chamber is made of high-quality insulation materials and insulation walls and barriers, which can concentrate the electric heating energy in the heating room, and the energy saving effect is remarkable.

 

Before discharging, check the equipment heating room. It is necessary for the heating room to be clean. No sundries, dust, oil, water, etc. In view of the goods placed, the same dry cleaning, no water stains, oil stains, etc. before discharging the material to be cleaned.

 

Contact

Telphone: +86-21-51095287

Email: haoyue@haoyue-group.com

Add:NO.1100,Hanggui Road,Jiading District,Shanghai City,China